Pouring candles at cooler temperatures can produce some interesting surface "blemishes." The rustic surface finish of these candles makes them a suitable compliment for many decors. It also does an excellent job at concealing nicks and scratches that may occur in handling.
Instructions: Melt a wax suitable for pillars (ex. IGI-1343) to 175F, adding dye and fragrance oil as usual. Then allow the wax to cool to a temperature of about 10 degrees F above the specified melting point of the wax. In a sloppy fashion, pour several ounces of the wax into a room temperature, or slightly chilled, metal mold (aluminum or tin works fine) that has been prepared with a light film of mold release. After pouring in a manner that splashes some wax along the sides of the mold, pause for about 3-5 seconds. Then fill the mold the remainder of the way in a fairly quick motion. If you pour too slow, you'll get something called "jump-lines." Moving the mold to a water bath after it has been filled with wax will aid in clean mold release.